Serving the Durham area  ·  (919) 813-7863  ·  Open Mon-Sun 7am-7pm
📞 (919) 813-7863 Free Quote

Metal Roofing in Rolesville, NC (27571) · Local Professionals

Durham Metal Roofing · Fast response in Rolesville and the Durham area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+245Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Rolesville still feels like a small town, but the new construction east of Raleigh is changing that fast. Large lots with open ground and new subdivision homes with fiber-cement siding are replacing old farm fields, and summer storms roll across that open ground with nothing to slow them down. Whether you are in a newer build off Rolesville Road or on a rural lot out toward Louisburg, your roof takes a beating.

Homeowners in 27571 call Durham Metal Roofing because we understand how Rolesville weather works. We have replaced wind-lifted panels on new construction and repaired leaks on older farm buildings. Our insured crews handle stone-coated steel roofing and metal roof repair, and we know the local building department's permit process. Call (919) 813-7863 for a free estimate.

Metal Roofing in Rolesville (27571)

Rolesville sits on rolling red clay, and the newer subdivisions east of town have tight lots with limited access for equipment. Many of the homes here are less than 20 years old, with simple gable roofs and asphalt shingles that are now hitting the end of their service life. Out toward the rural edges, you have barns and sheds with corrugated metal that need re-fastening and leak repair. The open ground means wind speeds are higher during thunderstorms, and we see more wind-lifted panels and separated seams here than in the older, tree-lined neighborhoods of Durham. The clay soil also holds water after heavy rain, so proper drainage around the foundation matters just as much as the roof itself.

Our team has worked in Rolesville and the surrounding areas long enough to know which problems show up again and again. We have repaired storm damage after summer squalls, replaced rusted screws on agricultural buildings, and installed standing seam roofs on new homes where the homeowner wanted something that would outlast the mortgage.

Our services in Rolesville

How a Job Works in Rolesville

Step 1: You call (919) 813-7863 or request a free estimate online. We schedule a time to come out and look at your roof, whether it is a simple ranch or a two-story colonial. We check the flashing, fasteners, and panels, and we take photos so you can see exactly what we see. We give you a written estimate before any work begins.

Step 2: Once you approve the estimate, we schedule the work and handle the permit with the local building department. For homes in tighter subdivisions, we coordinate with your HOA on panel profile and color if needed. Our crews are used to working on tight lots where a dumpster has to go in the driveway and materials have to be staged carefully. We protect your landscaping and keep the work area safe.

Step 3: When the job is done, we walk the roof with you, show you the completed work, and clean up every nail and scrap. We do not leave until your property is as clean as we found it, and we haul away all old materials.

Pricing in Rolesville depends on the size of your roof, the pitch, how many layers of old shingles we need to remove, and how accessible the property is. For a typical 1,500 to 2,000 square foot ranch, metal roof installation starts at $8 per square foot, and standing seam starts at $10 per square foot. Metal roof replacement starts at $9 per square foot, and a retrofit over existing shingles starts at $7 per square foot. If you just need a repair, metal roof repair and leak repair start at $450, and screw replacement starts at $750. Stone-coated steel and metal shingle roofing both start at $9 per square foot. We give free estimates, so call (919) 813-7863 and we will come out and give you a real number, not a guess.

My house is in one of the newer subdivisions off Rolesville Road, and the roof is about 15 years old. Is it worth switching to metal now?
Yes, especially if your asphalt shingles are starting to curl or lose granules. In Rolesville, the open ground means more wind and sun exposure, which wears shingles out faster. A metal roof will handle the wind better and last two to three times as long. We can look at your current roof and tell you if a retrofit over the shingles makes sense or if a full replacement is the better call.
A storm just came through Rolesville and I think some panels lifted on my barn. Can you come out quickly?
We offer free inspections for storm and wind damage, and we prioritize active leaks and wind-lifted panels. Call (919) 813-7863 and we will schedule a visit as soon as possible. We can tarp or secure the area if needed and give you a repair estimate.
What does a metal roof cost for a typical three-bedroom ranch in Rolesville?
For a 1,500 to 2,000 square foot ranch, most metal roof installations run between $12,000 and $20,000 depending on the material and complexity. Standing seam is at the higher end, corrugated panels at the lower end. We give free estimates with a firm price, so you know exactly what you are paying before we start.
Do I need a permit to replace my roof in Rolesville?
Yes, a full replacement or re-roof typically requires a permit from the local building department. The rules and fees vary, so we always verify with the town before starting work. We handle the permit application and inspection scheduling for you.
My neighbor and I share a property line, and I want to make sure my new roof does not cause drainage problems on their side. What should I do?
We can adjust gutter placement and downspout locations to direct water away from the property line. If your HOA has rules about drainage or roof color, we can help you get approval before we order materials. It is always better to have that conversation early.
Are you insured for work on my property in Rolesville?
Yes, we are fully insured with general liability and workers' compensation coverage.
What should I do to maintain my metal roof in Rolesville between storms?
Keep gutters clear of pine needles and leaves, especially if you have tall pines nearby. Check for loose screws or lifted panels after big storms, and wash off any moss or algae that starts growing in shaded areas. We offer inspections and maintenance plans if you want us to handle it.
Why choose us?

Trusted professionals in Durham

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Durham

All your work handled by qualified professionals in Durham

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

245+ Verified Client Reviews in Durham

⭐⭐⭐⭐⭐ 4.9/5 · 245 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Durham · Response within 24h · No commitment · ☎ (919) 813-7863

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Durham ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm