Serving the Durham area  ·  (919) 813-7863  ·  Open Mon-Sun 7am-7pm
📞 (919) 813-7863 Free Quote

Metal Roofing in Garner, NC (27603) · Local Professionals

Durham Metal Roofing · Fast response in Garner and the Durham area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+245Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Garner grew up along the old railroad and now stretches from downtown's brick storefronts out to the subdivisions off Timber Drive and Aversboro Road. Most of the housing stock here is 1960s to 1990s ranches, split-levels, and townhomes, the kind of roofs that have taken decades of Piedmont sun, summer thunderstorms, and pine needle buildup. If you live in ZIP 27603, you already know how fast a shaded shingle roof can turn into a mossy, curling mess.

That is why homeowners around Garner call Durham Metal Roofing. We are based in Durham and work this side of the county regularly, from the streets near Lake Benson Park to the older neighborhoods just south of the Raleigh line. We handle metal roof installation, repair, and replacement, including retrofits over existing shingles, and we know what Garner's humidity and storm seasons do to a roof.

Metal Roofing in Garner (27603)

Garner sits on rolling red clay, and a lot of the older lots here drain toward the street or a rear swale rather than a storm sewer. That matters when we tear off or retrofit a roof, because we need to keep runoff away from foundations and crawlspaces. Many of the ranches and townhomes off Aversboro and Vandora Springs have low-slope porch sections and shallow main roofs, so panel choice and flashing details matter more than they would on a steep colonial. Tall loblolly pines and willow oaks are everywhere, which means gutters fill with needles and limbs drop onto roofs during summer storms. We see a lot of wind-lifted shingles, failed pipe boots, and rusted fasteners on older roofs here, and we plan the metal system around those weak points.

Our team has worked across the Triangle, from Durham's Trinity Park and Forest Hills to the newer subdivisions toward Research Triangle Park. In Garner we focus on the housing stock that actually exists here: mid-century ranches, brick townhomes, and the occasional commercial building near the downtown district. We are fully insured, with general liability and workers' compensation, and we pull the permits that Garner and Wake County require for a re-roof.

Our services in Garner

How a Job Works in Garner

Step 1: You call (919) 813-7863 or request a free estimate. We schedule an on-site assessment, walk the roof and attic, check the flashing, decking, and existing layers, and talk through whether a retrofit over shingles makes sense or a full tear-off is the better call. You get a written scope and price before any work starts.

Step 2: We handle the permit and the work itself. On tighter lots near downtown Garner or in townhome clusters, we plan material staging and dumpster placement so we do not block neighbors or common driveways. If your home is in an HOA, we coordinate color and panel profile approval before ordering. Crews typically work in sections, keeping the roof watertight at the end of each day.

Step 3: Cleanup and final walkthrough. We magnet-sweep the yard and driveway for nails, haul off old material, and walk the finished roof with you. We do not consider the job done until you have seen the flashing, gutters, and fasteners yourself.

Pricing in Garner depends on roof size, pitch, number of layers, access, and whether we are repairing or replacing. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Repairs and leak calls start at $450, screw replacement and re-fastening at $750, and gutters for metal roofs at $9 per linear foot. Storm and wind damage inspections are free. The biggest cost swings come from decking condition, how many old layers have to come off, and whether the roof has complex valleys or skylights. Call (919) 813-7863 for a free estimate on your specific property.

My 1970s ranch near Lake Benson Park has two layers of shingles. Can you install metal over them?
Sometimes, yes. North Carolina code limits how many existing layers you can recover over, and we have to verify the decking and framing can carry the added weight. During the free assessment we check the attic and roof deck, confirm the layer count, and tell you honestly whether a retrofit or a tear-off is the right path for your home.
A storm just peeled back panels on my roof in Garner. How fast can you get out?
We prioritize active leaks and storm damage in Garner and the surrounding area. Call (919) 813-7863, describe the damage, and we will schedule the earliest available inspection, often the same week. We can tarp or secure an open roof to limit water intrusion while the repair or insurance documentation is sorted out.
What does a typical metal roof repair cost in 27603?
Most repair calls start at $450, which covers common issues like failed flashing, pipe boot leaks, or a small number of fasteners. Screw replacement and re-fastening across a larger roof starts at $750. The final price depends on roof size, how many penetrations are involved, and whether the leak has damaged decking underneath.
Do I need a permit for a metal roof replacement in Garner?
In most cases yes. A full replacement or re-roof generally requires a permit, and the threshold, fee, and inspection schedule are set by the local building department. We confirm the requirements with the Town of Garner and Wake County before work begins, and we handle the permit application as part of the job.
My HOA has to approve the roof color. Can you help with that, and what about the property line with my neighbor?
Yes. We can provide panel profile and color samples and a written description for your HOA architectural review. On property lines, the roof itself must stay within your lot and meet setback rules, and we keep staging and ladders on your side. If a neighbor's tree is dropping limbs on your roof, that is a civil matter between property owners, but we can document the damage for your records.
Are you insured for work on my Garner property?
We are fully insured, with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Garner's climate?
Pine needles and leaf debris are the main enemy here. Keep gutters and valleys clear, especially under the tall pines common around Garner, and have the roof inspected after major hail or wind events. We check fasteners, seals, and flashing during a free inspection and can recommend coating or painting if the finish is fading.
Why choose us?

Trusted professionals in Durham

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Durham

All your work handled by qualified professionals in Durham

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

245+ Verified Client Reviews in Durham

⭐⭐⭐⭐⭐ 4.9/5 · 245 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Durham · Response within 24h · No commitment · ☎ (919) 813-7863

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Durham ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm