Serving the Durham area  ·  (919) 813-7863  ·  Open Mon-Sun 7am-7pm
📞 (919) 813-7863 Free Quote

Metal Roofing in Butner, NC (27509) · Local Professionals

Durham Metal Roofing · Fast response in Butner and the Durham area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+245Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Butner is a town where mid-century brick homes sit on generous lots under tall pines, and the roofs have been through decades of Piedmont weather. If you live in one of the planned neighborhoods off Central Avenue or out toward the rural edges near Falls Lake, you know the look: solid brick ranches and split-levels with asphalt shingles that are now aging, curling, and losing granules.

That is where Durham Metal Roofing comes in. We are based in Durham and serve Butner (27509) and the surrounding area, and we specialize in metal roofing for exactly this kind of housing stock.

Metal Roofing in Butner (27509)

Butner's terrain is gently rolling, with red clay soil that holds water after heavy rain, and many lots are shaded by mature loblolly pines and oaks. That shade is great in summer, but it means pine needles, twigs, and leaf litter sit on roofs and in gutters, trapping moisture and growing moss and algae. The mid-century brick homes here often have low-slope sections over porches and additions, and those are the spots where flashing failures and ice dams show up first. We also see a lot of rural properties and farm buildings on the outskirts toward Bahama and Rougemont, where corrugated metal and ribbed panels are common and need re-fastening or leak repair after windstorms.

Our team has worked on everything from standing seam installations on brick ranches to metal roof over shingles retrofits on 1960s splits. We understand how Butner's building stock ages, and we know that a metal roof here has to handle hot, humid summers, severe thunderstorms with hail, and the occasional winter ice storm. We also know the local permitting process, and we will point you to the right building department for your address so there are no surprises.

Our services in Butner

How a Job Works in Butner

Step 1: You call us at (919) 813-7863 or request a free estimate online. We schedule an on-site assessment at your Butner property, and we look at the roof, the attic, the flashing, and the gutters. We give you a written estimate that explains your options, including metal roof over shingles if your existing roof qualifies, and we answer every question you have.

Step 2: Once you approve, we pull the required permits with the local building department and schedule the work. On tighter lots in town, we plan material delivery and staging carefully so we do not block driveways or neighbors. If your home is in an HOA or a historic district, we help you with the design review paperwork and color choices before we order materials. Our crews are fully insured and follow manufacturer specs, so your warranty stays valid.

Step 3: After installation, we clean up thoroughly, including magnetic sweeps for nails and a final walkthrough with you. We make sure you understand how to care for your new metal roof and what to expect in terms of maintenance. We do not leave until you are satisfied.

Pricing for metal roofing in Butner depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you are considering a retrofit over your existing shingles, that starts at $7 per square foot, but keep in mind that code limits how many layers you can have. Metal roof repair and leak repair start at $450, and screw replacement and re-fastening starts at $750. For smaller jobs like flashing or chimney repair, expect around $600. We always provide a free estimate with clear numbers, so call (919) 813-7863 to get started.

My 1960s brick ranch off Central Avenue has two layers of asphalt shingles. Can you install a metal roof over them?
Possibly, but it depends on the condition of the shingles and local code. North Carolina code generally limits re-roofing over existing shingles to two layers, and some jurisdictions may have stricter rules. We will inspect your roof and check with the local building department to confirm whether a retrofit is allowed. If not, we will recommend a full tear-off and replacement, and we will explain the cost difference clearly.
A storm just knocked a limb onto my roof near Falls Lake and I have an active leak. How fast can you respond?
We prioritize storm damage and active leaks. Call us at (919) 813-7863 and we will schedule an inspection as soon as possible, often within a day or two depending on demand. We can tarp the area to prevent further damage and then provide a repair estimate. We also document the damage for your insurance claim if needed.
What is the typical cost for a metal roof on a 1,500 square foot home in Butner?
For a 1,500 square foot home with a simple gable roof, a basic corrugated or ribbed panel roof might start around $8,000 to $12,000, while standing seam could range from $15,000 to $20,000. These are rough estimates. The actual price depends on roof pitch, number of penetrations, access, and whether you need a tear-off. We give free on-site estimates so you get a precise number.
Do I need a permit to replace my roof in Butner, and who handles it?
Yes, a permit is typically required for a full roof replacement or re-roof in Butner. Permit requirements and fees vary, so we always verify with the local building department before starting work. We can pull the permit for you as part of our service, and we schedule inspections as required. This ensures your roof meets code and your warranty remains valid.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues onto their yard. What should I do?
It is smart to think about drainage. We can adjust gutter placement and downspout locations to direct water away from the property line. If you are in an HOA, check the rules about roof color and style before ordering materials. We can help you with HOA submittals. For property line concerns, it is best to talk with your neighbor and possibly get a survey if you are unsure where the line is.
Are you fully insured for work on my Butner property?
Yes, we carry general liability insurance and workers' compensation coverage for all our crews. We are happy to provide proof of insurance before we start any work. This protects you and your property in case of an accident.
What maintenance does a metal roof need in Butner's climate, especially with all the pine trees?
Metal roofs are low maintenance, but in Butner's pine-heavy areas, you should keep gutters and roof valleys clear of needles and debris to prevent water backup. We recommend an annual inspection, especially after storm season, to check fasteners and flashing. If you have a painted metal roof, occasional cleaning with mild soap and water helps maintain its appearance. We offer maintenance plans and inspections.
Why choose us?

Trusted professionals in Durham

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Durham

All your work handled by qualified professionals in Durham

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

245+ Verified Client Reviews in Durham

⭐⭐⭐⭐⭐ 4.9/5 · 245 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Durham · Response within 24h · No commitment · ☎ (919) 813-7863

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Durham ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm